Skip to main content

Ratings: The Levels Your Evaluators Choose

The shared rating levels evaluators pick from, the score ranges that turn a number into a level, the gap-and-overlap banner, and what staff see.

Written by Maxwell Bass

Ratings are the levels your evaluators choose from when they rate a component: for example Unsatisfactory, Basic, Proficient, Distinguished. Every framework role in your district uses the same set of levels, called the rating scale. This article covers where the rating scale lives, how to edit it, how score ranges turn a calculated number into a level, and what evaluators and staff see.

Prefer to watch? The two-minute video below walks the Rating scale page, score ranges, and the gaps-and-overlaps banner. Read on for the details.

If the video doesn't load here, watch it on YouTube (2:13).

Looking for weights, rules, or the Scoring readiness panel? That is scoring, and it has its own article: Scoring: How Ratings Become an Overall Score.


Three Things to Keep Apart

Districts often use "rubric", "ratings" and "scoring" to mean the same thing. In Ascend they are three separate setups, and each lives in its own place on Settings → Ascend → Framework.

Setup

What it is

Where

Set per

Rubric

The domains and components evaluators rate, with a description of what each level looks like for each component

Select a role → Rubric

Role

Ratings (this article)

The levels themselves (1 to 4, their names) and the score ranges that map a calculated score to a level

Shared settings → Rating scale

District (shared by every role)

Scoring

How component ratings roll up into domain scores and one Overall Evaluation Score: weights or rules

Select a role → Scoring & weights

Role

The Framework page with the rubric, the shared rating scale and the Scoring & weights section labeled

Score ranges and the Scoring & weights section only appear for districts that use State Reporting. If you don't use it, your rating scale is just the list of levels and their names.


The Rating Scale

The rating scale is one list of levels for the whole district. Changing a level here changes it for every framework role at once.

  1. Go to Settings → Ascend → Framework

  2. In the left sidebar, under Shared settings, select Rating scale

The Rating scale page listing four levels with their score and SAI ranges

Each row shows the level's number and name, and, for districts with State Reporting, its score range and SAI percentage range in parentheses. Most districts start with a default four-level scale.

To rename or renumber a level: click Edit on the row, change Rating number or Rating name, and click Save changes. The new name appears everywhere the level is used: rating descriptions, observations, summatives, PDFs and the Staff Portal.

Caution: deleting a level also deletes its descriptions from every component in every role, and it cannot be undone. If your district needs a different number of levels, contact Lebra support rather than deleting.

Only district administrators can open Settings → Ascend. Group Admins and Evaluators see the rating scale in use (below), but cannot change it.


Score Ranges: the Cut Points

When your district uses scoring, Ascend averages or combines component ratings into a number, such as 3.06. A score range is the band of numbers that counts as each level. Score ranges are the cut points between Basic and Proficient, between Proficient and Distinguished, and so on.

  1. On the Rating scale page, click Edit on a level

  2. Under Score Range, enter the Min Score and Max Score for that level

  3. Under SAI Percentage Range, enter the SAI Min % and SAI Max %. This is the band of Student Achievement Indicator percentages that counts as this level

  4. If your district uses a District Determined Measure, also enter the DDM Min % and DDM Max %

  5. Click Save changes, then repeat for every level

The Edit rating dialog for Proficient with score range 2.5 to 3.49 and SAI range 50% to 74.99%

A typical four-level scale:

Level

Score range

SAI range

1 - Unsatisfactory

1 to 1.49

0% to 24.99%

2 - Basic

1.5 to 2.49

25% to 49.99%

3 - Proficient

2.5 to 3.49

50% to 74.99%

4 - Distinguished

3.5 to 4

75% to 100%

Both ends of a range count. Ascend rounds the calculated score to two decimals and then finds the level whose range contains it, so a score of exactly 2.5 is Proficient in the table above, and 2.49 is Basic. Your district decides the cut points; Lebra does not set them for you.

SAI and DDM percentages enter the overall score as the level they map to, not as the raw percentage. An SAI of 68% in the table above counts as a 3. See Scoring for the full calculation.


No Gaps, No Overlaps

Every possible score has to land in exactly one level.

  • A gap (for example Basic ends at 2.39 and Proficient starts at 2.5) means a score of 2.45 gets no rating, and the evaluation shows no overall rating

  • An overlap (Basic ends at 2.5 and Proficient starts at 2.5) is matched lowest level first, so a 2.5 quietly becomes Basic

  • Uncovered ends (the top range ends at 3.99) leave a perfect 4 unrated

The Rating scale page checks this for you. If any score can't be given a rating, an amber banner at the top reads Some scores can't be given a rating with these ranges and lists each problem, for example Rounded scores 2.40–2.49 match no rating between "Basic" and "Proficient". Cover the missing two-decimal values without overlapping the ranges.

The Rating scale page with an amber banner naming a gap between Basic and Proficient

To fix it: click Edit on the level the banner names, change the Min or Max so the range picks up exactly where the neighboring level stops (for example Basic 1.5 to 2.49, Proficient 2.5 to 3.49), and save. The banner disappears once every score maps to one level. The same problems also appear in each role's Scoring readiness panel under "Shared rating scale".

Tip: the most common gap comes from the Max field's example text, "e.g. 2.39". Type your own cut point, and walk the levels end to end before you leave the page.


Ratings Are On or Off for the Whole District

Ratings are turned on or off for your organization by Lebra. There is no switch in Settings, and there is no way to turn ratings off for one form, one domain or one role:

  • Ratings on: every component in a formal observation and a summative has a Rating field, the Staff Portal rubric shows the level descriptions, and reports and PDFs show the level chosen

  • Ratings off: none of those appear anywhere in the district. Observations and summatives are comment-only, and no overall score is calculated

A formal observation component with ratings turned off: a comment field and no Rating field

If you want some components to go unrated, the rating is optional on every component, so an evaluator can leave it blank and write a comment instead. If you want the numbers hidden but the level names kept, turn off Show numeric scores under Settings → Ascend → General → Evaluation options. To turn ratings on or off for your district, contact Lebra support.


What Evaluators and Staff See

Evaluators meet the rating scale inside a formal observation or summative. Selecting a component's Rating field opens the Select Rating window, which lists every level with that component's description of what the level looks like.

The Select Rating window in a formal observation showing four levels with their descriptions

Staff see the same levels and descriptions on the My Evaluation Rubric card in the Staff Portal, and, when your district uses scoring, the Evaluation Score Summary on their self-evaluations and summatives shows how their ratings rolled up and which level the overall score landed in.

An Evaluation Score Summary with a Proficient rating for each domain and an overall score of 3.06, Proficient

Neither evaluators nor staff see the Rating scale page itself.


Frequently Asked Questions

Can teachers be on a 4-point scale and principals on a 3-point scale?

The levels are district-wide, but the description of each level is written per component. For a role that uses fewer levels, leave the unused level's description empty on that role's components. Score ranges stay shared.

We renamed "Basic" to "Developing". Does that change past evaluations?

Finalized evaluations keep what was recorded. The new name shows on everything from now on.

Where do I set weights?

Weights are scoring, not ratings. Select the role in the left sidebar and expand the Scoring & weights section. See Scoring: How Ratings Become an Overall Score.

I don't see Score Range or SAI fields when I edit a level.

Those fields appear only for districts with State Reporting turned on. If your district should have it, contact Lebra support.

A domain shows a score but no rating.

The score fell in a gap between score ranges. Open the Rating scale page; the banner names the gap.


Related Articles

Did this answer your question?